聚合物类型降凝剂及其应用

在原油中添加降凝剂，可以降低原油凝点，改善原油低温流动性，以利于实现含蜡原油管常温输送。聚合物类型的降凝剂可分为均聚物和共聚物两类，分别介绍了近几年国内外常用的聚合物类型降凝剂的合成方法、化学结构式和应用情况。     

Diagnosis of dehydratase inhibitors in melanin biosynthesis inhibitor (MBI-D) resistance by primer-introduced restriction enzyme analysis in scytalone dehydratase gene of Magnaporthe grisea

We have established a simple diagnosis method for rice blast fungus resistant to MBI-D. This involves the preparation of PCR templates directly from the lesions in combination with primer-introduced restriction enzyme analysis PCR (PIRA-PCR).     

桑尺蠖越冬幼虫的耐寒性研究

研究了桑尺蠖越冬幼虫的耐寒能力 ,测定了虫体内抗寒物质的组成成分 ,并对其耐寒机理作了初步探讨。结果表明 :越冬幼虫从越冬初期至越冬滞育期 ,4龄幼虫的平均过冷却点从初期的-1 7 2℃下降至滞育期的 -2 4 4℃ ;5龄幼虫的平均过冷却点从 -1 3 4℃下降至 -2 4 8℃。越冬幼虫体内水分、糖元、脂肪含量下降 ,其中以糖元含量下降明显 ;越冬幼虫以“小分子糖—氨基酸—糖蛋白”物质系统形成抗寒基质 ,增强耐寒性。     

大黄鱼鱼苗耗氧率和窒息点的研究

为了给大黄鱼的生理学及大黄鱼养殖的放养密度、水质管理、饵料利用以及活鱼运输等提供技术参考依据,对大黄鱼基础代谢水平进行测定。在3种水温(14,20,25℃)条件下测定大黄鱼[Pseudosciaena crocea(Richardson)]鱼苗(体长7.8~9.1 cm,体重6.61~8.85 g)的耗氧状况,据此计算出大黄鱼鱼苗的耗氧率,及瞬时耗氧率与溶氧量及水温的相关关系。结果表明,大黄鱼鱼苗耐低氧能力差,其耗氧率和窒息点溶解氧水平都随水温的升高而增大,14℃时两者为2.833μg/(g.min)和1.42 mg/L;25℃时两者为4.677μg/(g.min)和2.27 mg/L。大黄鱼鱼苗的瞬时耗氧率在其呼吸生理的某个时段出现特殊现象:当水中溶解氧下降至其浮头点和昏迷临界点之间时,瞬时耗氧率会在一个较短的时间范围内呈现跳跃式提升,这种现象在已有的鱼类耗氧率研究中从未出现过。此后的瞬时耗氧率急速下降至最低点,其呼吸类型可归属于逆向型。     

Landscape ecology of <Emphasis Type="Italic">Phragmites australis</Emphasis> invasion in networks of linear wetlands

The interaction between landscape structure and spatial patterns of plant invasion has been little addressed by ecologists despite the new insights it can provide. Because of their spatial configuration as highly connected networks, linear wetlands such as roadside or agricultural ditches, can serve as corridors facilitating invasion at the landscape scale, but species dynamics in these important habitats are not well known. We conducted a landscape scale analysis of Phragmites australis invasion patterns (1985–2002 and 1987–2002) in two periurban areas of southern Québec (Canada) focusing on the interaction between the network of linear wetlands and the adjacent land-uses. Results show that, at the beginning of the reference period, the two landscapes were relatively non-invaded and populations occurred mostly in roadside habitats which then served as invasion foci into other parts of the landscape. The intrinsic rates of increase of P. australis populations in linear anthropogenic habitats were generally higher than those reported for natural wetlands. Riparian habitats along streams and rivers were little invaded compared to anthropogenic linear wetlands, except when they intersected transportation rights-of-way. Bivariate spatial point pattern analysis of colonization events using both Euclidian and network distances generally showed spatial dependence (association) to source populations. An autologistic regression model that included landscape and edaphic variables selected transportation rights-of-way as the best predictor of P. australis occurrence patterns in one of the landscapes. Given the high invasion rates observed, managers of linear wetlands should carefully monitor expansion patterns especially when roads intersect landscapes of conservation or economic value.     

地学空间数据聚类方法研究

本文介绍了地学空间数据迭代聚类的算法原理。根据类别分离度在线性映射变换下的不变性,用Ｋ－Ｌ变换进行地学空间数据的特征提取。在特征空间上两类分布的分离度只依赖于特征值最大和最小的两个特征向量,且其大小依赖于上述两个特征值与某个定值的偏差。据此可设计一个迭代过程,使分类后样本集的特征值都尽可能趋近某个定值,从而达到最佳分类结果。用该算法对乌鲁木齐河流域土壤类型进行了分类研究,取得了较好的效果。     

加降凝剂输油技术的现状及发展方向

输油管道添加降凝剂是改善原油代温流变性的一种物理化学方法，从降凝剂的筛选和复配，处理条件，应用方式，配套设施、应用效果等方面系统地介绍了含蜡原油添加降凝剂输送工艺的研究及应用现状，指出了降凝剂在研究和应用中存在的问题，对添加降凝剂的输油技术进行了客观评价，展望了降凝输油技术的发展方向。     

河南农产品主产区农民收入增长因素分析

在对河南１８地市农村统计资料进行聚类、回归分析的基础上，找出了影响河南农产品主产区农民收入增长的因素。认为畜牧业、非农产业的发展是提高农民收入的关键因素，并提出农村产业结构调整等政策建议。     

基于云环境和有限元并行计算的农机产品数字化仿真

为了解决现代化农机复杂产品数字化分析和仿真的计算开支问题,提出了一种基于云计算的农机产品数字化仿真系统平台,该平台采用云计算的三层架构和服务封装的思想,将有限元分析仿真系统的功能需求划分成服务,为有限元提供云环境下的并行协同计算功能。采用虚拟化技术,将有限元设计资源利用云环境进行集中管理,实现了软件交付的灵活性和计算资源的共享。以农机部件的大变形支持结构为例,对系统的模型建立、作业管理和数据处理3个方面进行了实例验证。仿真结果表明:采用云环境的并行计算后,其计算的收敛精度和计算效率都有了较大幅度的提高,能够计算大变形的农机部件结构,且资源的共享率较高,实现了农机部件的数字化、协同化设计。     

垂直圆盘式气吸排种器种子着地点原始误差数学模型的建立

使用气吸式播种机进行播种可大大提高作业效率,减轻劳动强度。针对目前垂直圆盘式气吸播种机在作业时存在种子着地误差较大的问题,分析其误差形成的原因与过程,建立相应的数学模型,为播种机具性能的改进提供理论依据。